Q7 (4M) Coding

[anemeth]

Andy,

Thanks for your post on coding. I set up DLR in MMI, High Beam Assist, Lock on Engine Running and switched off Start/Stop.

Only this I could not do is Chirp on Lock/Unlock. I went though Module 46 and I could not find "sounder_setting_beeptime_closing_central_lock ing" in Adaptation and also could not find "Tone when Locking" for MMI in Coding. Maybe on my car these cannot be set as I do not have alarm installed, thus alarm sounder is missing as well. This is the only thing I can think of.

Thanks,

[andyhud007]

Andy,

Thanks for your post on coding. I set up DLR in MMI, High Beam Assist, Lock on Engine Running and switched off Start/Stop.

Only this I could not do is Chirp on Lock/Unlock. I went though Module 46 and I could not find "sounder_setting_beeptime_closing_central_lock ing" in Adaptation and also could not find "Tone when Locking" for MMI in Coding. Maybe on my car these cannot be set as I do not have alarm installed, thus alarm sounder is missing as well. This is the only thing I can think of.

Thanks,

Hi mate

Correct, if you dont have the factory alarm you can't do this unfortunately

HTH

Andy

[AndresNiki]

Hi ! good day to all.

New to this Forum and want to say thank you for sharing valued information.

Actually I have VCDS for a long time and used with many Audis and enjoyed making all these adaptations for a better performance of our cars ..lot of joy too.

Currently I do own a Q7 4M 2016 located in South America and it is coming without the Audi connect service , but all is in it. ( MMI) Just not activate de DATA connection for the SIM slot card.

Somehow I have managed to get into the adaptation channel ( 5F ) and made available the Audi Connect app , Audi Smart Phone interface ( non functional as it is coded and seen here) and other cool staff related to adaptation channel but till now can not make the SIM card to be activated - it is greyed out in the MMI screen

Of course I subscribed My Audi page and have all the codes legal as a formal user but still not able the SIM to connect the network ( it does fully work on an iPhone)

Anyone has any info about 5F Long coding helper related to the SIM activation or network availability ? VCDS
I do appreciate any help as well any info you may need from my side I am willing to help ( my product here in South America perhaps is different coded and with different equipment attached to it for the different market but many options also are coded for this market )

Thanks a lot - cheers.