Quote Originally Posted by stringman View Post

very detailed advice- I dont suppose you have those measurments to hand at all?
Sorry guys. I've been working away from home for a bit so haven't managed to get onto the forum.

The holes for the passat saloon are : inner sensors 350mm out from the centre and 650mm for the outer two and both sets are positioned 118mm up from the join of the lower valence (the black bit).

For the estate it's 200mm for the inner two and 600mm for the outer and 80mm up from the valence.

For the CC the inner sensors are 300mm out from the center and 20mm up and the outer sensors are 600mm from the center and 30mm up.

These figures come from VW, so don't blame me if you find a chunk of metal behind any holes you drill. If in doubt, remove the bumper and check for yourself.

Regards - Jim.