Reprogramming the remote control of 2004 PASSAT

**archibald_999** · 29-01-2008,04:02 AM

I found this picture, but I am confusing about the step 3. The button I need to press is on the first key in the ignition or the second one?

**paulp** · 29-01-2008,08:31 AM

you must press the button on the key fob you used to lock door

**archibald_999** · 29-01-2008,04:55 PM

This method does not work for my remote control. I tried for several times, but when I pressed the unlock button the horn will sound for a few minutes and the red light was flickering.

**paulp** · 29-01-2008,06:43 PM

To Do This You Must Have 2 Keyfobs,recheck You Have Fitted Battery Correctly To Fob.......switch On Ignition With Working Keyfob,use Non Working Key To Lock D/s Door,with Remote Press Unlock Once Beep Will Sound.....wait 6 Seconds...press Unlock Again To Activate Code. I Have Done This A Few Times Without Any Trouble ......try Again

**archibald_999** · 30-01-2008,02:01 AM

Originally Posted by paulp

To Do This You Must Have 2 Keyfobs,recheck You Have Fitted Battery Correctly To Fob.......switch On Ignition With Working Keyfob,use Non Working Key To Lock D/s Door,with Remote Press Unlock Once Beep Will Sound.....wait 6 Seconds...press Unlock Again To Activate Code. I Have Done This A Few Times Without Any Trouble ......try Again

Unfortunately, this method does not work for my remote control too...... I have fitted battery correctly. The beep did not sound when I pressed Unlock. Just the small red LED was flickering. When I pressed the Unlock until the LED stopped flickering, the door opened, but the beep sounded for a long time and the LED was flickering again.....