Printable View
Hi all,
I want to change the engine coolant of my golf 1.9tdi sport '05. I was told that if I unplug the radiator at the bottom I should drain the car completely. But after some research I found that there is some blender for the engine ... Can someone please help me out by confirming and pin pointing where this blender is.
Also does anyone know how much coolant does my engine take, (in terms of litres)?
Thanks a lot, guys.
by taking the bottom hose off yes you will drain the rad but the block will still have some left in it, your car holds 8 lts of coolant in total mate
so how do u empty all of it? I found one of those additives to clean the engine from the inside, was going to use it ... what do you think?Quote:
Originally Posted by phil miller
when i did mine i took of the bottom hose then took off a heater matrix hose, i think i got about 5/6 lts out, as for flushing it, the only make of flush id use is FORTE but thats cos ive been using there products for the last 15 odd yrs, is your coolant dirty and in need of a flush?
no the fluid seems good, i just want to clean so i get it spik and span from the inside heheQuote:
Originally Posted by phil miller
What if I run the engine with the hose off and keep adding water to the tank fill up will that clear the system?
you could but i wouldnt reccomend it, best off to drain out what you can and then add fresh coolant, it will be fine mateQuote:
Originally Posted by ccs
ok will c what I can do may will do it this weekend :):) will let you know. :)Quote:
Originally Posted by phil miller