PhilHallinan
06-10-2022, 03:22 PM
I have a strange noise when vehicle returns to idle after deceleration. This is intermittent and only happens sometimes.
Refer to video here: Audi SQ5 Plus (2016) strange noise at idle - YouTube (https://youtube.com/shorts/XR__nQhxN3k?feature=share)
Possibly related but I am not sure, I have these error codes, but with no dash warning lights and the car drives fine.
P22D300, Turbocharger Turbine Inlet Valve Struck Closed, Status: Passive/Sporadic
P22D200, Turbocharger Turbine Inlet Valve Struck Open, Status: Passive/Sporadic
In test mode the actuator seems to work fine, however there are some noises when it is manually moved which I am not sure if normal.
Refer to video here: Audi SQ5 Plus (2016) electronic actuator in operation - YouTube (https://youtu.be/r7MeSNDU4is).
The actuator link arm does not move as smoothly as I would have expected under stationary condition. This may be normal though.
Refer to video here: Audi SQ5 Plus (2016) electronic wastegate actuator in test mode - YouTube (https://youtu.be/61lLHln_J5U)
I am not sure if the last 2 videos are perfectly normal, and whether the error codes are related to the noise, but I have been trying to diagnose this for some time wioth no luck!
I have a Autel MP808BT diagnostics scanner, so far only utilised the basic features. Is there guidance for specific tests or readings I could take to help?
Thank you!
Refer to video here: Audi SQ5 Plus (2016) strange noise at idle - YouTube (https://youtube.com/shorts/XR__nQhxN3k?feature=share)
Possibly related but I am not sure, I have these error codes, but with no dash warning lights and the car drives fine.
P22D300, Turbocharger Turbine Inlet Valve Struck Closed, Status: Passive/Sporadic
P22D200, Turbocharger Turbine Inlet Valve Struck Open, Status: Passive/Sporadic
In test mode the actuator seems to work fine, however there are some noises when it is manually moved which I am not sure if normal.
Refer to video here: Audi SQ5 Plus (2016) electronic actuator in operation - YouTube (https://youtu.be/r7MeSNDU4is).
The actuator link arm does not move as smoothly as I would have expected under stationary condition. This may be normal though.
Refer to video here: Audi SQ5 Plus (2016) electronic wastegate actuator in test mode - YouTube (https://youtu.be/61lLHln_J5U)
I am not sure if the last 2 videos are perfectly normal, and whether the error codes are related to the noise, but I have been trying to diagnose this for some time wioth no luck!
I have a Autel MP808BT diagnostics scanner, so far only utilised the basic features. Is there guidance for specific tests or readings I could take to help?
Thank you!