Bluetooth Coding for Audi A3 in Bristol

[andrewkru]

hi there people,

as per the I would like my car coded to bluetooth, i have recently installed the unit into my car. i am in the bristol/portishead area. i did try and use you location finder thing and i tried to contact b1nuzz but i didnt have enough posts.

happy to pay for the service

thanks in advance

Andrew

[Guest 2]

Welcome to VWAF - I can PM him and bring his attention to this thread.

[andrewkru]

thank you

[Guest 2]

Done :)

[minty2013]

I have Micro-CAN which will work with 2004 onwards CAN only cars. Ive not done blue tooth before but if we could find what we need to do im happy to help.

[Guest 2]

Micro-can will work with the 8P so you're a good candidate.

If OP tells me his model of car, what is fitted and radio etc I'll work out the coding and paste it up.

[andrewkru]

thats great, its an a3 2010 2.0 tdi the head unit is a symphony 2 + and has a bose sound system. i installed the oem bluetooth. do you require any further information?

minty would you be able to help me out tomorrow eve, i could come to you ??

[andrewkru]

by the way chris i used your guide to install the module i put the module behind the HU but your guide was extremely helpful. thank you very much.

[minty2013]

Im in north Bristol just of J16. Once you get over 10 posts you can PM me.

Im more than happy to help though, even better if we can get the coding info in advance as it saves stumbling around so shouldnt take too long.

[Guest 2]

Quick Q - do you have MFSW (multi function steering wheel)?

[andrewkru]

i work in aztec west so i am pretty close, are you able to pm me your email address minty?

[andrewkru]

yes i do have the Mfsw and DIS

[Guest 2]

Super - thanks for letting me know you used my guide, hopefully it was easy to follow!!

Coding -

Step 1

- Go into Can Gateway (19)

- Coding (07)

- Have a look through the options and look for 77 - Telephone (use your bottom arrow key on your keyboard to browse)

- Tick this and close

Ignition OFF then Ignition ON

Step 2

- Go into Radio (56)

- Coding (07)

- +4 to the second digit in the original code - EXAMPLE - Original Code - 0310211 ..... New Code - 0710211

- Accept code and press Do It

- Close and go back to main screen

Step 3

- Go into Steering Wheel (16)

- Coding (07)

- Change the 4th digit from the left to 4 - (with Radio/Telephone/Voice Control)

- Accept and close

Step 4

- Go into Telephone (77)

- Coding (07)

Your exact coding for your car - 0001222

Ignition OFF, Ignition ON

Search from your phone, Audi UHV xxxx should appear, passcode is 1234 or 0000

[andrewkru]

wow thanks for being so helpful!

[Guest 2]

You're welcome, hopefully it helps.

[andrewkru]

minty does this make sense to you? sounds like latin to me :-)

[minty2013]

Yeh im only 2 mins from Aztec West.

Coding seems ok. Ill go through it with you. Its fairly simple, even easier when Chris gets all the info ready.

Ill pm you in the morning about times and my contact details.

[Guest 2]

Yeh im only 2 mins from Aztec West.

Coding seems ok. Ill go through it with you. Its fairly simple, even easier when Chris gets all the info ready.

Ill pm you in the morning about times and my contact details.

Everything you need is in post #13. OBD port is above the throttle, bright pink.

[minty2013]

minty does this make sense to you? sounds like latin to me :-)

Ive just sent you a PM.

[andrewkru]

i received your pm minty.

[andrewkru]

i couldn't reply , but i should be able to now :-)

[minty2013]

All done buddy. Enjoy :)

[Guest 2]

All done and working? :)

[andrewkru]

thanks so much for your help buddy!

[andrewkru]

chris your instructions worked a treat. I will have to fine some more things to retro fit, it was enjoyable !

[Guest 2]

Excellent - time for an rnse nav upgrade to make your dash look nice ;)

[andrewkru]

Excellent - time for an rnse nav upgrade to make your dash look nice ;)
Yes! The rnse in next on the list to do. Looks easy enough to do!

i also want to install cruise control, how complex is that to do? How do I know what parts to get? I've tried looking for a guide but I haven't seen one specific to my 8p

[Guest 2]

I've added rnse and cruise, both are pretty simple.

How To - Retrofit RNS-E to Audi A3 8P Retrofit Guide (http://www.vwaudiforum.co.uk/forum/showthread.php?145964-How-To-Retrofit-RNS-E-to-Audi-A3-8P-Retrofit-Guide&highlight=)

Did minty do an autoscan of your car? Your steering module should be compatible with cruise but best checking the part number first.

[andrewkru]

Did minty do an autoscan of your car? Your steering module should be compatible with cruise but best checking the part number first.

he did but he didnt save it, is there any other way of finding out? what part would i need?

[Guest 2]

Only way is disassembling the steering column surround, removing airbag and 'wheel and eyeballing the Steering ECU.

[andrewkru]

Wow a lot of work.


Looks like I need a re scan :-)

[tone090]

Hi,

Sorry to bring up a thread from the past! I have recently purchased a newer Audi A3 (11 Sportsback), and an Audi A3 bluetooth module. I will be fitting this once i receive the wiring Ive bought off eBay.

I don't suppose anyone of here (from Bristol) could help with the coding for to set it up with steering wheel functionality? Happy to chuck you a few £ or a bottle of your choice?

Thanks!