Bluetooth Coding for Audi A3 in Bristol

[andrewkru]

hi there people,

as per the I would like my car coded to bluetooth, i have recently installed the unit into my car. i am in the bristol/portishead area. i did try and use you location finder thing and i tried to contact b1nuzz but i didnt have enough posts.

happy to pay for the service

thanks in advance

Andrew

[Guest 2]

Welcome to VWAF - I can PM him and bring his attention to this thread.

[andrewkru]

thank you

[Guest 2]

Done

[minty2013]

I have Micro-CAN which will work with 2004 onwards CAN only cars. Ive not done blue tooth before but if we could find what we need to do im happy to help.

[Guest 2]

Micro-can will work with the 8P so you're a good candidate.

If OP tells me his model of car, what is fitted and radio etc I'll work out the coding and paste it up.

[andrewkru]

thats great, its an a3 2010 2.0 tdi the head unit is a symphony 2 + and has a bose sound system. i installed the oem bluetooth. do you require any further information?

minty would you be able to help me out tomorrow eve, i could come to you ??

[andrewkru]

by the way chris i used your guide to install the module i put the module behind the HU but your guide was extremely helpful. thank you very much.

[minty2013]

Im in north Bristol just of J16. Once you get over 10 posts you can PM me.

Im more than happy to help though, even better if we can get the coding info in advance as it saves stumbling around so shouldnt take too long.

[Guest 2]

Quick Q - do you have MFSW (multi function steering wheel)?