A4 B6 - Single din to double conversion

**manners1982** · 17-06-2010,07:37 PM

Evening,

Sorry for the delay - I'm looking for the single unit if you can be of any help?!

Many Thanks,

Mark

**Chriseybaby** · 18-06-2010,10:04 AM

Where did you guys find the destructions to do this? From what I can gather I just need the double din cage, part number 8E0 858 005 F and the nav unit (may also get the double din climate since mine isnt prestine)

**dan.taylor.1** · 26-03-2011,07:35 PM

Id also like to know what bits i need to just get it to double din, not fussed about the stereo yet, ill just put in a aftermarket or symphony, is the part no. above correct for the cage, does anyone have a pdf guide at all?

Dan

**nattyboy** · 26-03-2011,10:11 PM

Hello mate, I completed the double din conversion and with a bit of patience it can look factory fitted. Not too sure of the part number but went into Audi and after a bit of trial and error, got the right cage. The surround and the climate unit will need trimming down to accommodate the cage, I used a junior hacksaw and a emery board to clean it up. Taking the dash apart to get the cage in is tricky and at times I was concerned when I realised how many parts i had removed from my car, but well worth it. I needed a quadblock adaptor and an antenna adaptor but it could be different depending on the head unit you are fitting, give me a shout if i can help out any more

**benjie** · 26-03-2011,10:43 PM

I have a guide to fitting RNS-E and it also includes how to change from single din to double din and the things you'll need in addition to the nav unit.

I have tried to attach it to this post, here goes...