Climate Control Codes

**climber** · 19-12-2007,08:01 PM

I have a 1999 AUDI A6
Does anyone have a full listing of the parameters available from the Climate Control display? I have a partial listing which I attach here if anyone is interested.

You can display speed, engine RPM, Flap positions etc and Internal temperature as measured by the Climate Control. Use the information with caution as I cannot guarantee the accuracy, it is based on my experiments and observations.

Fault codes as displayed would be really helpful.

Thanks,

Climber

**webchem** · 19-12-2007,09:56 PM

Wow this is amazing!

I never knew I had bought such an intelligent car...

Anyone know if one of the codes locks the two sides of the temperature control...

Will try this in the morning - how do you get out of the mode once in it?

**climber** · 23-12-2007,11:47 AM

you just press auto and it goes back to normal mode.

**Peter D** · 23-12-2007,01:16 PM

Do you know how to reset the CC to stop the display flashing for the first 4 minutes. This was triggeres by a battery change. Great info, thanks. Peter

**climber** · 30-12-2007,01:32 PM

Sorry- can't help on that one. Never seen the effect on my CC and I have disconnected it more than once from the battery.

**garry.goodway** · 02-04-2010,11:53 AM

Originally Posted by Peter D

Do you know how to reset the CC to stop the display flashing for the first 4 minutes. This was triggeres by a battery change. Great info, thanks. Peter

Hi Peter

My A6 has just statrd showing the same problem of the flashing lghts at start and like yours

they go off after a few mins.
do you ever solve this problem and if so how.

many thanks
Garry