I went and had a look at a place today called Longlife Exhausts.
They are a large chain with depots all over, website an all.
I would like to have a milltek, but they don't do one for an allroad 2.5, not to my knowledge anyway and they cost!
Talking to the guy who was going to do the work, he said he could remove both the cats, and the resonator and put a single pipe straight through and split it again a bit further back( just after where the resonator sits)with new mufflers and tips.
Basically I dont know jack' about this, so I was looking for some guidance on weather or not this would be ok to do.
Should the cats be left in, will it fail mot if they are removed is the resonator important etc.
cheers all.
ben