Xmas Special For The Pre 2000 AGU Powered A3 - Revo Performance Software Only £249 + VAT

[Tour-De-Force]

Here's the first of our Xmas Specials from Tour-De-Force & Revo and it's for those of us running the classic 20V powered cars.

For all of December Tour-De-Force will carry out pre and post power tests on our chassis dyno and Revo your pre 2000 AGU powered (cable throttle/none drive by wire) car for just £249 + VAT.

This deal is applicable to the pre 2000 Audi A3 1.8T 150bhp and when mapped will produce circa 190bhp and 225ftlbs of torque.

If you're not sure if your car is an AGU/Cable throttle car then please compare to the image below. Note the throttle cable and throttle body in the lower left of the image.



If you have any questions please don't hesitate to contact us via the below details and finally happy Xmas from TDF!

[m33sta]

Hi, Im very interseted.

Are you open weekends?

On another note I used to go to Kimbolton School!!

[Tour-De-Force]

Hi,

We are open weekends and have 9AM Saturday or 3PM Saturday free at the moment. Please give me a call to book in.

Kimbolton is a brilliant village and the industrial park where we are based is a bit of a motorsport hot spot!

Best Regards
Matt

[m33sta]

Thanks for getting back to me. It would be the 19th of December I would be looking at. Im having the car serviced tommorow so will have to wait till the middle of the month for more pennies.

So if you have available slots then I will call you to book.

[Tour-De-Force]

19th is no problem. Give me a call and we'll get you booked in.

Best Regards
Matt

[m33sta]

Thanks Matt,

providing nothing nasty turns up with the service I will be contacing you shortly.

[GeorgeBoy]

Aww booo no-one in Scotland doing this?? Could be a pressie from santa!!

[luckymacy]

Thanks Matt,

providing nothing nasty turns up with the service I will be contacing you shortly.

Well, how's it run remapped now?

[m33sta]

Hi luckmacy, it turned out I have issues with comms on my port, so we have arranged sometime next week to whip the ecu out and bench flash it

I shall report back then

[luckymacy]

Hi luckmacy, it turned out I have issues with comms on my port, so we have arranged sometime next week to whip the ecu out and bench flash it

I shall report back then

Cool. Take pics of the removal, flash and post flash testing!