Hi guys,

I have just bought the cruise control installation kit for my Audi A3 2004 8P car. I have read and know how to install and fit the kit and I also know how to recode the steering module to accept cruise and know all about the ESP realignment etc that you need to do after.

However, one thing that is puzzling me is that a few members have commented that you need to login into the engine module and activate cruise on that module to, which then displays a G next to the module ident when looking at it through VAG-COM. It says that if you don't do that the cruise light on the dash doesn't work!

Can someone please clarify this for me as I thought the login on the engine module and the 'G' was only for the MK4 chassis and the none CAN based platform as the engine ECU is what control cruise on these cars where as on the CAN base cars its the steering module that sends the relevant info to the relevant modules. Is this right? Cheers