Unable to change Adaption settings

[Sparky69]

Hi Doe's anyone have any experience the 'adaptions' i've recently changed my convenience module in my audi A4 but im told i need to set the adaptions correctly to recognise my coded key fobs. The problem i have is that with VAG COM i can't change anu values in adaptions, i get an error saying my software is not recognised, which it is. However if i plug my old module back in i'm able to get into that section..

Confused..

Anyone got any ideas?

Many thanks

[VAGMAN54]

is it the same part number ?to recode the keys you will need both keys what car is it

[Sparky69]

Hi,

Thanks for the reply, yes the new module had exactly the same part number, even the final letters were the same.

I have both keys yes.

[VAGMAN54]

then you must have a faulty unit,it carnt be the wiring or it wouldnt talk to the old unit,it should talk to the new unit straight away for you to change the coding and i believe you only have to match the remotes

[Sparky69]

well thats the odd thing, because it does talk to the module but doesnt allow me to change settings in 'adaptation'.

[VAGMAN54]

so you can change them on the old but not the new ? what version of vcds are you using ?

[Sparky69]

Yes thats right, thats whats puzzling me!

vcd's... ? do you mean version of VAG COM ? if so 409-1

[onzarob]

Yes thats right, thats whats puzzling me!

vcd's... ? do you mean version of VAG COM ? if so 409-1

VCDSis the new name for VAG-COM. As for 409-1 it needs to be registered for adaptions.

[Sparky69]

It is registered...

[T5 TDI]

If it's registered you can upgrade. (It's free) the latest version is 805-04. Also some of the fleabay interfaces don't work that well...