mk3 golf wont rev above 2000 RPM...

[Richie....]

hi all, i have a problem with my golf mk3 1.6 cl. the main wires in the engine all melted, i sat and soldered them all back and matching, took me 4 hours. now the car doesnt seem to be firing on all 4 cylinders, changed the dizzy cap and rotor arm and the spark plugs. cleaned the carb too. it just opends the carb for air and makes a loud "durrrrr" (sucking in air).

been told the ECU could be fried, any other places/points i could check?

cheers guys, need help asap other wise im breaking.

ohhh and it has 157,000 on the clock

[Crasher]

Could be a fried sensor, ECU or wiring fault. Get a fault code read done or scrap it.

[Richie....]

Could be a fried sensor, ECU or wiring fault. Get a fault code read done or scrap it.

had the laptop in it said "too many errors", wasnt sure wether its me car or the cable, and the cable is brand new lol

[Crasher]

“Too many errors to continue” can be down to your baud rate settings on VAG-COM. I guess the cable is a cheap fleaBay item and serial port for the shareware version 409.