Quote Originally Posted by a8 tech View Post
Hello all,
i have noticed there are lots of questions about ipod integration for Audi models so I will offer some advice on what you can retro fit at this present time.

Q7 mmi high
Here's the retro fit kit for ami 4L0 055 307 A
contents
4L0 055 307 A MEDIA WIRING HARNESS
WSK 014 720 INSTALLATION INSTRUCTIONS
4L0 864 515 A 6PS COVER
4L0 864 981 E 6PS MEDIA COMPARTMENT
4L0 898 283 SPRING SET
WHT 001 250 A PLASTIC PINS
N 906 986 06 TORX SCREWS FOR MEDIA HOUSING
4L0 863 269 4PK PROTECTIVE PIECE
N909 187 01 TORX SCREWS FOR PROTECTIVE PIECE
4E0 057 785 XX THIS IS THE AMI CONTROL UNIT WHICH YOU NEED TO DOUBLE CHECK FOR THE LATEST HARDWARE/SOFTWARE VERSION PART NUMBER.

OK YOU NEED TO CHECK YOUR MMI SOFTWARE VERSION BECAUSE IT NEEDS TO BE RUNNING AT 3460 AND ABOVE SO I WOULD ADVISE YOU UPDATE TO THE LATEST RELEASE UPDATE 4L0 998 961

Code the gateway for media position 2 and clear all your fault codes and test.
The ami fits beneath the arm rest and your just bridging the diagnostic wires and most cables at the multi changer which the pre made loom fits lovely.Also you will need your ami lead for the ipod connection

B8 A4 AND A5
These models with mmi high or the operator controls around the gearstick/centre console can support ami and dension 500
AMI CONTROL UNIT 4E0 057 785 B,D OR F
HOUSING 4E0 060 700
COVER CAP 4E0 060 701
SPRINGS 4E0 060 702
DRAW 4E0 060 703
WIRING LOOM 4F0 051 592 A


B8 A4 AND A5 GENERATION 3 RADIO WITH AUX INPUT SOCKET
These models can support ami can bus and ipod interface buid week 22/08
WIRING LOOM 8K0 051 592
AMI KIT 8T0 057 785
Also a new glove box is required

A3,TT,A4 UP TO B7 ,A2,A6 UP TO 2005 concert,chorus and symphony 2,rnsd ipod kit interface 20 pin kit single din 8E0051444A


From 2005 double din units chorus,concert and symphony +,rnse and bns 5 supports ipod interface 12 pin double din 8E0051444B


A8 mmi high
Supports ami and dension 500

AMI CONTROL UNIT 4E0 057 785 B
HOUSING 4E0 060 700
COVER CAP 4E0 060 701
SPRINGS 4E0 060 702
DRAW 4E0 060 703
WIRING LOOM 4F0 051 592 A
AMI FITS IN THE GLOVE BOX FOR A8

A6 mmi high
Supports ami and dension 500

Build week 22/07 pr number 7d3,8yq up to build week 44/07 ami kit 4E0 057 786B includes fitting instructions


Build week 45/07 till build week 21/08 ami kit 4E0 057 785D includes fitting instructions


WIRING HARNESS 4F0 051 592A fits both units control units


A6 and Q7 mmi Basic Plus (RED SCREEN)
Supports Dension 500

2010 RNSE UNITS FOR R8,TT,A3
AMI can be retro fitted
wiring harness kit 8K0 051 592
AMI unit 8T0 035 785

NOW ADDED MMI 3G AMI ACTIVATION
ami lead part number 4f0 035 909 (just check to make sure the securing clip comes with the lead to locate the dock in the glove box)

this lead plugs direct into the 5f control unit so no need to splice wires etc

the glove box has a pre cut position so you can remove the glove box find the pre cut and push the insert out and locate the ami ipod dock

then plug the ami lead into the ami and refit the glove box

now you need to access the hidden menu in address 5f

select address 5f

select adaption 10 channel 6 and set the value to 1 and save

now reboot the mmi using the softkeys

when the mmi comes back on press and hold set up and car until the green menu comes on

scroll down find diagnosis and enter then select settings and then scroll down to ami set this to 7/8

come out of the green screen and reboot mmi

now test the ami

total cost around £170 + vat



Update

Ami retro fit kit official audi p/n 4G0051960 for mmi 3g also if the dealer does the retro fit the code changes via svm will now make the mmi 3g coding permanent
Hi

I suppose your inundated with queries. I'm new to the forum, I recently purchased an Audi A6 Avant 2010. Got a shock to find no auxiliary input in the glove box to play my iPhone!!!!!
Can you suggest a solution that doesn't cost the earth to solve. Any help very much appreciated.

Thanks