Audi a4 b7 suspension

[Zakaudi]

Hi Guys!

Im new to this so please bare with me!

Just recently bought an Audi A4 Quattro S line on a 05 plate (B7), I have 1 question which is driving me nuts and hope some one can give me the answer?

From my understanding the s line models have a lower suspention setting to the base and se models, but how low?
I was thinking of upgrading my suspension to eibach springs but taking into account i already have an S line set up will it be worth the cost?

What is the difference in height by mm in the eibach springs and the standard s line springs?



Thank you guys

[Crasher]

The S line is about 10 to 15-mm lower and the Eibach’s will be about 25-mm lower again as they give approx 40-mm on a standard car.

[Zakaudi]

Thank you for your reply, im at ease now!



But im slightly confused

Now i know the difference between the two im in a slight dilemma?

Im thinking of getting a set of Rs4 19" black alloys from ebay (see the link)

http://cgi.ebay.co.uk/ws/eBayISAPI.d...tab%3DWatching

Do you think it will be worth me getting the 19" alloys and also dropping it on the Eibach?

or should i just forget about the Eibach, your input would be greatful?

[Crasher]

They don't list the ET of those wheels or the intended tyre dimensions. PM me your chassis or reg number.

[Zakaudi]

Hi Crasher sorry cant PM as im new to the site and "BIG BROTHER" wont allow access!

my reg: (I trust you guyz)



Thanks once again

[Crasher]

Delete that reg number now. Audi’s maximum recommend size for an 8EC 0E9 (which is what I think your cars is) is an 8x18 ET40 running 235/4018 tyres so an 8x19 would need a 235/35 19 tyre. Unfortunately that advert doesn’t tell you tyre or wheel ET info.

[Zakaudi]

[tails]

Do both, post the pics of the completed job.

[jeepis]

Hi. Here you go picture B7 Avant of mine with R19 8.0J et35 with 235/35 GoodYear
Front lowering -35mm(weitec), rear stock s-line about -25mm