A daft one...

[RichardCranium]

Is there a way of altering the temp on both sides of the car at the same time. ie without having to move both knobs. I'm sure there must be, but havent managed to find it yet!!
may be i should just read the manual

[AndyE66]

Yes, there's a setting on the AMI / MMI on my A4.

Press Car then press the lower right hand side MMI button (shown as AC on the display).

On the next screen select Sychronisation, then select On.

[RichardCranium]

Nice one. Thanks mate. Come to think about, i've seen that but didnt know what was going to be synched

[AndyE66]

I don't think I'd have known if the dealer hadn't shown me at handover!

[dansansome]

i dont know why car manufacturers bother to make instruction manuals lol

i certainly dont read them...

[RichardCranium]

Found it!
There are a few things that i didnt know how to do, but sorted them by fiddling or educated guess work. For instance, i couldnt understand why the radio would come on when starting the car, even though i'd turned it off before removing the ignition key. Press and hold the on/off button and that does the trick.

Also i found that you can get a digital speedo in the centre of the instruments if you press the reset button under the wiper stalk a couple of times.

[HotChip]

Is there a way of altering the temp on both sides of the car at the same time. ie without having to move both knobs. I'm sure there must be, but havent managed to find it yet!!
may be i should just read the manual

A little thing that is niggling me. On my B6 you could resychronise both sides by pressing and holding the auto button, but it appears this doesn't work on the B8. When the missus is in the car she likes it hot, so she keeps unsynching it. Anyone know of a way to easily resynch without going through the MMI?

Thanks

HotChip

[browellm]

A little thing that is niggling me. On my B6 you could resychronise both sides by pressing and holding the auto button, but it appears this doesn't work on the B8. When the missus is in the car she likes it hot, so she keeps unsynching it. Anyone know of a way to easily resynch without going through the MMI?

Thanks

HotChip

Yep, you resync by pressing and holding the drivers side temperature dial.

[HotChip]

Yep, you resync by pressing and holding the drivers side temperature dial.

That sounds logical, thenks for the help. Maybe one day soon I'll finsih reading the manual!

HotChip