Hi, just had to change my radiator - it was leaking where the plastic side section meets the metal radiator section and was leaving an ever growing puddle in front of the drivers side front wheel. Apparently this is common!

Rather challenging getting it out without a manual but did eventually so now it's fixed and saved a few bob in the process. New VW rad £106 + vat plus the g12 coolant.

The key to getting the bumper off (apart from dismantling the front of the car) is the 3 torx screws in the wheel arch but more cunningly there is an additional crosshead screw vertically concealed each side, mid front in the wheel arch - ahh that's better....