Bleeding fuel

[Adam_W]

Changed the injector pump on my v6 and i cant get it to start

Can see a bubble of air in the clear pipe and i keep turning it over but the cars complaining about low oil pressure if i keep cranking it

Am i doing something wrong?

I stuck the belt back on the injector pump as close to where it was originally as i could, will it make a difference if its not spot on?

I left all the injectors cracked off and all but one bleed fuel everywhere so done them all back up but it just wont fire and i still have the air bubble.

Help please im stuck

[kenney]

Hi yes these engines are hard to start if the pump is not adjusted properly

[Adam_W]

can anyone point me in the direction of how to time the pump?

Looks like the in tank pump has failed as well

[kenney]

Hi iam afraid this is a highly complicated job,if you do not have the know how ,not to mention the proper tools needed,and not least, vehicles from model year 2002 the new injection pump must be adapted to immobilizer

[Adam_W]

looks like i need to set TDC on the V6 then set TDC on the pump and go from there, not too difficult if you can find the timing marks.. any idea where they are on the engine?