Loom identification help please

[Sloppy]

Still chasing several electrical gremlins, most seem to be derived from a section of loom on the drivers side which comes from within the drivers (right hand side) foot well and out of the bulkhead and into the under bonnet fuse box which the ecu is mounted upon. (its had several crap repairs and lookes *******)

Within this fuse box it plugs into the engine loom (Mines part no 4G2971072GF) via a red and a white connector, it then drops out the bottom of the fuse box through a grommet and into the car. Ive tried googling for part numbers to no avail and looked for 'dash looms' on eaby but cant seem to see the correct connectors on these looms of the large grommet that it should have on as it enters the engine bay?

Anyone any ideas or a link to a loom schematic so i can track it down?

Many thanks Joe

[Crasher]

£1731.60 retail inc. no UK stock, special order from Germany and no confirmed release date BUT possibly two weeks.

[Sloppy]

£1731.60 retail inc. no UK stock, special order from Germany and no confirmed release date BUT possibly two weeks.

Is that for 4G2971072GF? ive forund that one ebay for £85.

Im after the loom that connects from that into the cabin? any links to an exploded diagram of the looms? i might have to dismantle the dash to try find a part number on a tag.

[Crasher]

The price was for the part number you gave and is described as the wiring set for engine, there is no official diagram, rather a generic one but I can tell more with the VIN.