2016 Sharan - Brake bleeding procedure

[Gangerman]

Very little hair left!

Despite multiple attempts both with and without a pressure bleeder and also resorting to doing it the old fashioned way I cannot seem to get a good firm brake pedal after doing a brake fluid flush, I was extremely diligent in not letting the pressure bleeder or the brake fluid reservoir run low on brake fluid. I can only assume there must be a bleeding procedure and I still have air in the system as a result of not completing the procedure???

Any help or knowledge greatly appreciated!

Would anyone know if there is a specific brake bleeding procedure to these, and if so where I could find some detail on it?

2016 Sharan SE Nav, 2.0 TDI, CUVC, 150.

[Roverfan]

Try level vehicle. I've found many points of bleeding including clutch do not favour the DIY form of jacking (one side, front or back)

[Gangerman]

That is interesting, will certainly keep that in mind, Thanks