Spent the last couple of weeks (in my spare time) retrofitting High Line TPMS - module in each wheel well and antenna in roof lining -

Activated everything with VCDS and hey presto......

TPMS.jpg


Ordered 5 sensors from Ebay - part # 7PP907275F - for some unknown reason only 1 sensor turned up yesterday - so I decided to put this in a wheel anyway, I'll do the rest when they arrive.

Initialised the tyres in the MMI and went for a drive - after 30 mins nothing showing on the screen -

My 2 questions:
Do all sensors have to be present in the tyres for them to be recognised.
Do the sensors need 'programming' or 'learning'

thanks in advance

Mark