A3 8P Front Subframe Alignment (camber issues)

[8PRyanB]

Good Evening,

Has anyone dealt with re aligning the front subframe on an 8P A3 before? I’ve got positive camber on my near side front wheel and negative on my offside front wheel. Front Subframe was missing two 18mm front bolts when I bought the car (sketchy I know), I replaced the bolts but obviously the subframe would of shifted being driven with the two missing. Has anyone experienced this or know where the alignment holes are for the front subframe on an 8p a3 or simply know how to align one correctly/special tools needed?


Is there a certain way it needs to be done?
Hunter alignment? Would subframe alignment be included in a Hunter alignment service?
More than happy to pay what it takes to get it sorted..


Tried everything in my knowledge and losing my mind with it atm..🤯🤯


Any help is very much appreciated 😃👍🏼


Thanks in advance, Ryan.

[Crasher]

There is a limited amount of adjustment by moving the consuls, what are the full figures as anything positive says to me a bent wishbone. Powerflex offer front wishbone front bushes that can dial in some adjustment. If you are into modding I like to use a pair of new Febi Aluminium wishbones and Powerflex front camber and consul caster bushes