VCDS Scan

[as400]

Recently purchased a 2012 1.6tdi.
Now have purchased a proper VCDS.
Went out in the car tonight, 1 mile up the road in traffic noticed it was almost already up to 90C oil temp and the rev counter was going up and dwon between 750 and 1500 revs even in neutral...returned home and once switched off the fan remained on for a bit.
Suspected this was a regen...never experienced it before.
Left it 15 minutes then went for a drive, drove perfectly fine.
Back home plugged in the newly purchased VCDS...got this

IDE00427-ENG101722 Particle filter: difference pressure-DIP_PF 1.66 hPa
IDE00430-ENG102682 Particle filter: field regeneration request status-STATE_RGN_PF 0
IDE00431-ENG102952 Particle filter: field regeneration lock status-LV_STATE_TEST_RGN_PF_INH_HLD 00000000
IDE00432-ENG103847 Particle filter: time since last regeneration-T_WOUT_RGN 2254.90 s
IDE00433-ENG103279 Particle filter: oil ash volume-MASS_ASH_PF 41.3623190 g
IDE00434-ENG102050 Particle filter: soot mass calculated-MASS_SOOT_SIM_PF 6.20 g
IDE00435-ENG101197 Particle filter: soot mass measured-MASS_SOOT_PHY_PF -2.53 g
IDE00436-ENG102397 Particle filter: kilometers since last regeneration-DIST_RGN 29.5 km
IDE01407-ENG100958 Particle filter: fuel consumption since last regeneration-FCO_SUM_RGN 1.66 l
Thursday,17,February,2022,18:33:27:64379
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 21.9.0.2 (x64) HEX-V2 CB: 0.4555.4
Data version: 20210903 DS330.0
www.Ross-Tech.com

Is this anything to be worried about?

oil ash volume-MASS_ASH_PF 41.3623190 g

[Crasher]

The ash is high but I can't remember the maximum, sometimes it comes up on the screen, sometimes it is in advanced measuring blocks, sometimes nowhere! The soot value is fine, any fault codes?