Interior fan failing

**Hair Bear** · 28-05-2021,10:17 PM

Hi,
I've just noticed the fan on my 04 Touran has stopped working on settings '1' and '2'. Settings '3' and '4' are fine. Would this be a switch fault or something deeper?
Thanks.

**Crasher** · 29-05-2021,05:38 PM

The speeds are set using a set of resistors in a pack placed in the blower which cools them down as on lower seating, there is a lot of heat wasted. Normally when the resistor pack fails all but the max speed are lost but we are replacing a LOT of these fans and resistors which are separate parts.

**Hair Bear** · 30-05-2021,08:39 AM

Hi, hence the question. What dealings I've had on other cars has been all failed except max. Is this a dash out job or keyhole surgery through the radio dock?

**Crasher** · 30-05-2021,12:51 PM

The blower and resistor are glovebox out jobs.

**Hair Bear** · 30-05-2021,01:23 PM

Ok, not so bad then. Job for when it's not so hot outside.
Thanks.

**Crasher** · 30-05-2021,06:14 PM

I just mowed the lawn, nearly died of heat stroke

**Hair Bear** · 03-07-2021,05:46 PM

A quick look around suggests I'm looking for a 4 pin socket with a sort of heatsink arrangement on the back of it. Would that be right?

**Crasher** · 03-07-2021,06:23 PM

That is the variable resistor from the Climatronic from memory

**Hair Bear** · 03-07-2021,09:35 PM

Ok, watched a couple of youtube vids and plucked up the courage to go a'rummaging.
With the soft cover off from the underside of the glovebox, I found a resistor pack, unplugged it and tested it as per one of the videos. It does appear to be kaput. Tried the fan without it and only speed 4 works, plugged it back in and had 3 and 4, so I do feel I'm heading in the right direction.
Part on order.