Hi Guys & Gals

I'm a Newbie Here.

I have just purchased an Oem Audi A4 Avant backup camera from Audi Ebay, I have fitted the camera & Wiring into the car (Ebay item N°114758516072) , but I'm having a few issues, firstly the wiring harness had some plugs/sockets not wired, (e.g The socket to connect the camera inside the boot lid) I never received any wiring diagrams with the unit, I have worked out the canbus Hi & canbus Lo under the rear seat, but I have 4 large wires at the front (glove box end)Brown & Yellow/red, 2 of these are in a socket & 2 have crimps on the ends.

I have coded the car to instructions from a friend

Coding with VCDS

The coding with VCDS is similar, I will write the steps briefly below:
Module 19 Gateway

  • Select Installation List
  • Check 6C Rear View Camera
  • Save

Module 09 Central Electrics

  • Select Coding
  • Go to Byte 35 and check Bit 4
  • Exit and Do it!

Module 5F Multimedia

  • Select Adaptation
  • Search for VPS
  • Car_Funktion_List_BAP_Gen2_VPS set the new value activated and press Do it!
  • Car_Funktion_List_BAP_Gen2_VPS_msg_bus set the new value Terminal 15 and press Do it!


but I am receiving 3 fault codes, the car knows the camera is there but doesn't activate when the car is put in reverse.

Address 6C: Back-up Cam. Labels: None
Control Module Part Number: 4M0 980 556 A HW: 4M0 980 556 A
Component and/or Version: RVC Compact H18 0250
Software Coding: 0000000000000000000000
Work Shop Code: WSC 00000 000 00000
ASAM Dataset: EV_CamSysRVRVCPANAMLBEv 005010 (AU49)
ROD: EV_CamSysRVRVCPANAMLBEv_AU49.rod
VCID: 336579E99AE4FBDA04-8066
Fault Codes have been Erased


3 Faults Found:
10490624 - No End-of-Line Programming
B2013 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 135
Mileage: 109672 km
Date: 2021.05.16
Time: 14:12:24


OFF


13636352 - Control module not coded
U1013 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 135
Mileage: 109672 km
Date: 2021.05.16
Time: 14:12:24


OFF


10489856 - No Basic Setting
B2010 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 5
Fault Frequency: 1
Reset counter: 135
Mileage: 109672 km
Date: 2021.05.16
Time: 14:12:24


OFF
anyone have any advice of what the problem is please