Audi 2009 A6 le Mans Avant SatNav MMI - 3G, Basic or High ?

[audikid]

2009 2.7ltr A6 Le Mans Avant

Can anyone confirm my SatNav as below is a MMI - 3G, also is it a Basic or High.
Both the CD and Multimedia player are in the glovebox. The multimedia has 3 slots, DVD and 2 SD.
As seen in the image the DVD is from 2010.
If I had a current 2018 map, would the SatNav need any further updates to use the 2018 Europa map.

Thanks

.jpgIMG_1467.jpgIMG_1468.jpg

[Andrej88]

Judging by the button, you have MMI 3G Basic.
Check your version in MMI under navigation setup. HNav = 3G High and BNav = 3G Basic.

You should do firmware update prior to map update.

[MFGF]

2009 2.7ltr A6 Le Mans Avant

Can anyone confirm my SatNav as below is a MMI - 3G, also is it a Basic or High.
Both the CD and Multimedia player are in the glovebox. The multimedia has 3 slots, DVD and 2 SD.
As seen in the image the DVD is from 2010.
If I had a current 2018 map, would the SatNav need any further updates to use the 2018 Europa map.

Thanks

.jpgIMG_1467.jpgIMG_1468.jpg

Hi,

If you had MMI 3G High your MMI knob would have a "top hat" joystick button to allow you to pan around the maps. Here's a photo of my old 2009 car to compare with:



Cheers!

MF.

[audikid]

Thanks guys

Looks like its a 'B' :- Software Ver. BNAV_EU_P0022_D1 and Map 4G0919884D_ECE 5.8.4

Any clues as to what version of software/firmware I should use for the current 2017/18 Europe Map.

thanks again

[Andrej88]

Update to BNav_EU_K0257_2_D1 first, then to BNav_EU_K0260_1_D1

[audikid]

Thanks.

Have registered to My Car.com as per instructions as 'Audi A3 How to Perform a Software Update to the MMI'.

Cannot find any link labelled 'To service' or to the 'Map update section'.

Has this been removed ?


thanks

[audikid]

Update to BNav_EU_K0257_2_D1 first, then to BNav_EU_K0260_1_D1

Having the firmware mentioned above and a 2017 Europe map.

Is there a tutorial link of how to carryout the update procedure.

thanks

[audikid]

ok

Do I put the map on a 8GB DVD and the Firmware and FSC on a 64G SD and carrying the Firmware updates first. Found a procedure info from 2014 for a BNAV 3G with no HDD, 3D and Joystick, would this still be current for today.

Do I need both East and West maps to carryout the Map update or can I just use the West.

Also I've been told that these updates could reset the Engine Management Map ??

[B5NUT]

Updating the MMI software does not reset your engine ECU firmware, whoever told you that was pulling your chain...

[Andrej88]

Here's a guide for firmware and map update...

http://docdro.id/mqjDVM2