A4 b6 1.9 tdi injector loom replacement

[brucielee]

Ok so the question is, has anyone replaced the injector loom/harness on this engine awx code, given that the engine runs front to rear and the loom/harness has to be taken out going towards the bulkhead of which there is no chance of it coming out, does the engine need to be unbolted and lifted up above the bulkhead in order to do this, bit of a nightmare if it does for such a simple enough replacement, which seems to be a common fault in the 19tdi throughtout all audi/vw vehicles
If someone could shed some light it would be greatfully appreciated