1.9 tdi engine mount sensor,

[fil1973]

I know this fault code is very common
Does anyone know the resistance value of a good sensor?

Was thinking of putting a resistor between the wiring plug terminals
& clearing the fault code


Sent from my iPhone using Tapatalk

[GeorgeE]

I know this fault code is very common
Does anyone know the resistance value of a good sensor?

Was thinking of putting a resistor between the wiring plug terminals
& clearing the fault code


Sent from my iPhone using Tapatalk

If you are just going to bodge it rather than fix it there doesn't seem to be any point, you can just ignore the fault code which is what most people do.

[fil1973]

I do understand what you are saying, just i have gone through 3 second hand mounts & all the same & just wanted the fault off the list


Sent from my iPhone using Tapatalk

[niall campbell]

why don't you buy a new one ??


how much is a new one ?? how much is an old one ??

then there is the muckabout factor in cost

[fil1973]

Been told dealer only & very expensive as it is a hydraulic mount with sensor,

Think i may just have to live with it a while longer


Sent from my iPhone using Tapatalk

[niall campbell]

if its hydraulic, maybe the seal is away and there is no oil in it ..................................


phone the parts department & ask for a price for the part, not supply and fit

[zollaf]

isnt the normal fix to fit b5 mounts and ignore the code.

[fil1973]

Sorted now guys!
Found a good condition one fully working for £10

Now fitted & fault code cleared with vcds & all is well!

No codes!


Sent from my iPhone using Tapatalk