Trip computer stuck?

[aeroforceone]

Hi there,
My trip computer will only scroll through the information in the '2' section (total averages I think) and will not show me the '1' selections. I used to see average mpg for the journey but now only the mpg over forever, so is stuck at 32.2.
How do I access all options on the trip computer (i. e. Switch between 1 and 2)?
Thanks!
3.0TDi 58 plate with fancy mmi.

[MarkTM]

Usually the toggle switch on the right hand stalk, the one underneath (reset IIRC) should change the view in between the center dials if lightly,quickly pressed, a long press will reset them.

[aeroforceone]

Thanks MarkTM, will fiddle around when I get in next. There is only the one switch, right? The one on the end of the stalk that can rocker up and down? I could only scroll back and forth last time but will try different types of press! The only other switch I remember on that stalk is the one that does something to change the wiper frequency I think.

[rowdy-999]

Thanks MarkTM, will fiddle around when I get in next. There is only the one switch, right? The one on the end of the stalk that can rocker up and down? I could only scroll back and forth last time but will try different types of press! The only other switch I remember on that stalk is the one that does something to change the wiper frequency I think.

No There's another switch on the bottom of the stalk. This toggles between short and long term averages.

[aeroforceone]

Aha! Got it - he's a sneaky little fella! Thank you rowdy-999.

[MarkTM]

What about me, I said it first!

[rowdy-999]

What about me, I said it first!

I just described it better.

[aeroforceone]

Haha, sorry MarkTM! I just re-read your post and you did indeed say the switch was underneath. 1000 thanks to you too my friend.
(But rowdy did explain it better.... )