The reason we bought a new car was because my wife is due #3 this week. One of the reasons for buying the Q7 was the 3 Isofix points on the back seat as we will have a 6 yr old and a 3 yr old, both in high back boosters, and an infant in a back facing baby seat with an isofix base.

As the isofix base has a leg that sits on the floor, we thought it best to put this on one of the outer seats so the foot wasn't resting on the transmission tunnel causing the seat to tilt up a little. This also means not having to lift the baby, in the car seat, over a booster seat to attach it to the isofix base.

You can imagine my face when I realized that our two high back booster seats, both isofit, don't fit next to each other in the middle and outer seat! They are both the same "Jane Quartz" seat, which does mean that the widest bits are exactly the same on both which is the problem - they don't fit next to each other.

Does anyone have two isofit high back boosters positioned next to each other in the middle and an outer seat? Can you please share make/model as I bought the current seats after a lot of trips to mothercare / Halfords etc, with a tape measure trying to find the narrowest seats of the kind!

Currently got one in the 3rd row, but don't really want to keep it like that as you have to have both seats in the 3rd row up to get to the stupid seat belt connector (with one up and one down and a car seat, it is a real faff trying to plug the seat belt in, have to do it leaning in through the boot!). Poor design in my opinion!