Q7 (4M) Coding

[MicaBlue]

So will we all be needing this?

[srbsq7]

Good to know what was actually changed! I didn't realise there was so much space behind that foam.

Mica - yes, I think all q7's require it unless they were fixed prior to delivery. I can't remember when this recall was raised but think it was 4-6 weeks ago.

[RickOb]

Good to know what was actually changed! I didn't realise there was so much space behind that foam.

Mica - yes, I think all q7's require it unless they were fixed prior to delivery. I can't remember when this recall was raised but think it was 4-6 weeks ago.

Or.. unless you're in a country that allows you to decline the 3rd row seat.

[ragebe]

I saw it was a service-recall the last time I logged into MyAudi. Not had a notification from the dealer though.

Sent from my STV100-4 using Tapatalk

[srbsq7]

No worries PaperEyes.. good to meet you also!

I have :

Yours
Nemo's
Fear's
Wolek's
Satyb's
Elrao's
Sven's

I really have enough coding now, the problem is I need Adaptation Channel maps, but I dont know (Wolek may know) if ODBEleven can do Adaption Channel Map exports. You recall I got some of yours from your car the other day, but I didnt grab from the others the other week

Cheers

Andy

I had a go at exporting the Adaptation Channel Maps on OBDeleven earlier. Here are the steps to do it. You need to do the backup for each channel. The ones Andy requested were:

5F
A5
3C
CF - can't access. I've emailed OBDeleven to see if there is a fix in the pipeline
46
09
17

Go into the channel, and select Backup (3C in this screenshot)

2016-11-07_18-28-34.jpg

Give the backup a name and click START

2016-11-07_18-30-45.jpg

2016-11-07_18-32-09.jpg

Repeat for each Channel, then..

Go back to the "My Car" section from the main menu and click on History

2016-11-07_18-32-57.jpg

You can then see all the backups for each channel plus any changes you've made. Click on the mail icon at the top right to email the backups to yourself (txt attachment).

2016-11-07_18-34-27.jpg

[andyhud007]

Legendary

[srbsq7]

I now have access to module CF and I think a few others.

Can't fault OBDeleven for their customer service, they reply really quickly and at all times of the day.

I needed to clear data from Android settings which fixed it: Clear app data - YouTube

[JOEREZ]

I also removed the Bose Sub from my compartment for more room, currently have a Alpine PWE-S8 that I removed the integrated amp, rewired the speaker to 2.6ohm and hard wired it. I have the bass for the sub in the MMI all the way up for it to work good and it is a tight fit under the driver side 3rd row seat. The stock sub I measured 1.6ohm and just ordered a Pioneer TS-SW2002D2 8-inch which I'm going to wire for 1ohm and see if the works better.

On another forum some one was asking to to Lock / Unlock with FOB while engine is running, It can be done with OBDeleven and the VCDS coding is below:

2017 Q7 Lock / Unlock with Remote while engine is running:


This is the VCDS coding for Locking / Unlocking vehicle with Key FOB while the engine is running.


Address 46: Central Conv.


Byte 9
Check bit 7


----------------------------------------------------------------------


My stock Byte 9 Hexadecimal was 0B and the mod is 8B

I also am installing a remote start from Avenue Sound in Freeport, NY, they said it's working with the original key FOB, I'm going to try and install myself when it comes in.

[andyhud007]

On another forum some one was asking to to Lock / Unlock with FOB while engine is running, It can be done with OBDeleven and the VCDS coding is below:

2017 Q7 Lock / Unlock with Remote while engine is running:


This is the VCDS coding for Locking / Unlocking vehicle with Key FOB while the engine is running.


Address 46: Central Conv.


Byte 9
Check bit 7

Hey JoeRez, and welcome!

Thanks for the above, I was talking to a couple of guys in Russia about this also and they did a quick video on it here: Link

Seems like a very simple Mod to me...

Thanks for sharing

Andy

[srbsq7]

Thanks Joerez! Very handy now the weather is starting to get colder (especially as no aux heater this year!)

I just enabled this and it works immediately without having to switch of the ignition etc.

One thing I noticed is, you can lock the car with the fob or touching the handle (if you have advanced key), however you need to use the unlock button on the key - touching the handle or boot doesn't unlock. I'm happy with this and probably a good safety feature.

Thanks again