Hi
I've done a basic search on here and can't find anyone with the same issue.
The engine on our B6 (105BHP TDi) will start, run for a few seconds and then die. Immediately that happens I get the "Parking Brake Fault" in the information panel. This is with the brake released I should add.
The car will immediately restart, and run, but as you pull away the engine dies again. This is without re-applying the parking brake.
I can hear the motors operating on the callipers and have just ordered a switch as the cheapest repair option to try first.

Then the thing will run fine for a few minutes allowing you to drive away and again the engine will die on you. Not great as you lose PAS, brakes etc.

Anyone have any ideas?
Thanks