Connector pinout help needed on interior light panel.

[captainchoas]

I am putting a dashcam in my car, and gone for one that is small enough to sit infront of the interior mirror. I have fed the wire up into the interior light panel, and looking to find a switched 12v and GND does anyone have a wiring diagram for a 2007 A4 that might be able to help with the wire colours I need in the connector shown? I don't really want to run wires all the way back if I can avoid it.

Thanks.

IMG_20160409_191256.jpg

IMG_20160409_191640.jpg

[Guest 2]

Safest way run it down to the fuse box. Don't be putting strain on a system as it may not designed for anymore current.

[captainchoas]

Where could I pickup a switched live ast the fusebox?

[captainchoas]

OK, so this morning, I ran the cable inside the roof panel, and down the R/H arm, and it's now in the fuse panel. Looking for some help as to the best place to get a fused, switched +12v and a good ground. Can someone help? Thanks.

[nevo]

Buy a piggyback fuse holder and use a spare fuse on the panel thats on the ignition,ground it on the metal frame.