Remap and EGr Delete

[as400]

Looking to get both of these done, will I need to buy a blanking plate for the EGR in addition to getting the delete worked into the remap?

Seems to be three different designs of plate...any ideas on which is good for the 3.0tdi if indeed its needed at all?

[markaz]

If you're getting the EGR mapped out then you won't need a blanking plate as mapping it out keeps it shut anyway

[Gazwould]

True .

But if you can fit a full blank the manifold end of the egr feed pipe it would prevent it filling up unnecessarily with exhaust gasses.

[as400]

Thanks guys so for the sake of a £7 blanking plate may as well get it fitted...

[Gazwould]

7 more like 4 .

[bops6]

Maybe stupid question but why you blanking the egr? Mine is still in full operation and i'm happy with the performance

2007 3.0tdi asb le mans
hybrid turbo, decat,miltek, 20's etc
330-350 bhp
450-500lbst

[markaz]

With it remapped out you're wasting £7 (or £4) as nothing will enter the inlet system anyway

[Gazwould]

It is optional , but a blank at the manifold end if viable prevents any exhaust gasses filling a pointless void that is the egr feed pipe, bit like an extra side branch resonator on an exhaust system .

Anyone have a good pic or technical drawing of egr , feed pipe and exhaust manifold ?

[as400]

Maybe stupid question but why you blanking the egr? Mine is still in full operation and i'm happy with the performance

2007 3.0tdi asb le mans
hybrid turbo, decat,miltek, 20's etc
330-350 bhp
450-500lbst

Yes my car too drives without error right now but I want to keep the car for some years, it has done 85K so am thinking preventative medicine. Terraclean then EGR delete with a remap, possible EGR blank and then am thinking should I do anything with swirl flaps to again prevent any issues.

[zafirovp]

Removing things is not a prevention. Just clean the intake after the EGR Delete. If there is any play in the axle change the flaps or delete them as well.


Sent from my iPhone using Tapatalk