Hi all,

Just purchased a 2011/2012 C7 and have moved over from another forum (was dead over there). The vent wheel on the front passenger side was pushed in so decided to fix it today.

I made two hooks from coat hangars and slid them into each side of the vent where there are two holes. Tried to pull the vent out but didn't want to move. An alternative was to remove the 5 bolts from the glovebox: 3 at the top on the inside and 2 underneath. This then gives perfect access to the vent, showing the two very strong metal clips holding it in place. Didn't need to remove the vent, just pushed the wheel back into place.

Voila.