A6 C7 Sedan Custom SKR (soon with RS6 rear)

[Los_Cuentos]

Nice ride. Is that Oolong Grey or Black?

[Clauuualc]

Nice ride. Is that Oolong Grey or Black?

It was Oolong Grey.

Long time since I last checked this forum. Now I have another A6, a 3.0BiTDI. Kept the rear bumper and the wheels from the 2.0TDI and made a full RS6 and LED front conversion.

image.jpg

[Rassi]

Very nice project, with what looks like a very professional installation!

To install the S Line rear diffusor, what exactly had to be adapted? Are they physically the same size, just different mounting points?

And the ABT front bumper, any approximate price, if you don't mind sharing?

[Los_Cuentos]

It was Oolong Grey.

Long time since I last checked this forum. Now I have another A6, a 3.0BiTDI. Kept the rear bumper and the wheels from the 2.0TDI and made a full RS6 and LED front conversion.

image.jpg

Such a nice front Love it!

[Clauuualc]

Very nice project, with what looks like a very professional installation!

To install the S Line rear diffusor, what exactly had to be adapted? Are they physically the same size, just different mounting points?

And the ABT front bumper, any approximate price, if you don't mind sharing?

The sline rear diffuzor is tha same size just with different mounting points.
I don't have the ABT front bumper. This is the RS6 front bumper and on the previous car I had the S6 bumper (which is physically the same as the s-line bumper).

[Rassi]

The sline rear diffuzor is tha same size just with different mounting points.
I don't have the ABT front bumper. This is the RS6 front bumper and on the previous car I had the S6 bumper (which is physically the same as the s-line bumper).

Thanks! Just to clarify: the S Line diffusor would fit without any need to re-shape or otherwise make changes to it, except finding a way to physically fix it to the bumper?

[Clauuualc]

Thanks! Just to clarify: the S Line diffusor would fit without any need to re-shape or otherwise make changes to it, except finding a way to physically fix it to the bumper?

Yes. Maybe you have to cut some mounting points from the bumper. Wit a bit of work it will fit.
But maybe is easier to buy also a S-Line bumper. You find loads on ebay. Then you just need to change the brackets under the tailights and everything fits 1:1.

[Clauuualc]

Upgrades to date for the 3.0BiTDI:
-Full LED Headlight Conversion
-19" A7 Wheels from the 2.0TDI
-SLine rear bumper with RS6 diffuser from my old A6
-Full RS6 front conversion with all OEM RS6 parts. Including wide fenders.
-Revo remap (370hp+/- and 800Nm)
-RS6 air filter housing and filter

Below are pictures before and after.

[Rassi]

That is a very impressive conversion, especially the wider front fenders and LED retrofit! Did you also install the wider side skirts? Not clear from the "after" photo if that is the case.

How is the Revo remap? Considered one myself, just wanted to be sure that it is noticeable and that the gearbox adaptation is suited to the extra power.

[Clauuualc]

I have the SLine skirts modified to fit the RS6 fenders. (They are wider at the front, near the front wheels). My car was originally non-SLine.

The Revo remap is good. In the first 200-300 km the gearbox tries to adapt to it and sometimes at high velocities it switched more times between 7th and 8th gear. But after that everything is ok. Top speed is limited to 266km/h. I think it is worth it. There are also tuners that upgrade the power to 900Nm without changes to the gearbox. So I think the 800Nm is "safe".

Here is a test I made with VCDS. Unfortunately I don't have one before the remap.



And more pictures:





And a "bonus". 700+ revo hp