A4 B6 Cabriolet BOSE Retrofit - Help Needed

[wmccann]

As said, I laid 2 Cables the length of the car (along door an through the ski hole as far as I can remember) which had BNC connectors on each end. The amp I got (amp and speakers were part of a used set) had no plug so I got a new one from Audi and created my own loom which terminated in BNC sockets for the input (output I used the cabling that is already going to the speakers as to change this would be a real pain (especially to the door speakers) and tbh, I can't see it making much difference.

Can't remember the part number of the amp but it was off a 2005 or 2006 model. I need to lay a new earth back to the radio to remove ground loop noise at the weekend so I can check if you want me to.

Attached are a few more items from my archive (I did a ton of modding back 2008 - 2011 essentially adding on EVERY audi extra from parking sensors to highline to auxiliary winter heater )

If you need a new plug to the amp, send me a picture and I will look up the part number for you.

W.