01 1.8 turbo aum traction control

[Dj_integra86]

I rencently bought this car with a suspect turbo failure and over the last 4 days have been doing a lot of jobs to it to get it running right. The jobs I have done include replacing the turbo, 2 bottom arms with drop links, mass air flow meter, cleaned the oil pick up pipe and now I have just found that the oil breather pipe is broke and I am waiting on a new 1 to replace ( I have checked all the pipe under the inlet and all are good apart from the said 1) also a rear caliper and rear brake pads
( I'm glad I got the car cheep as it has cost me a small fortune lol)
anyway I have been getting the fault code 17705 pressure drop between turbo and throttle valve I think it says and that's all I'm getting im not using a vcds to get the code but could this possible have some sort of connection to the traction control light being on as I have seen that the aum is a very fussy system and a lot of thing are linked?

[Doctle Odd]

The traction light is probably due to a failed abs sensor or a poor connection or it may be turned off

[Dj_integra86]

I'm not getting any abs faults or any other faults apart from the one mentioned in 1st post and it did go off yesterday after using the car for a while but then when I came back to it this morning to sort the oil pick up out as it was throwing the oil check light up it came back on and never back off

[Doctle Odd]

You need a proper scan with VCDS, look here for someone near you off this site https://www.google.com/maps/d/viewer...8.kMTwqF0PoXwc

[Dj_integra86]

I know someone who has vcds and also does remapping who is a good friend but I just thought I would try and get some more info before I ask them to come and scan it.