Traffic sign recognition nearly coded

[pierrotori]

Bogiorno alex
Do you have the pdf?
For me no calibration
Ciao

[alexzx]

Buongiorno Pierotorri,
yes i have the pdf but i hope that the calibration is possible with the 4G0907107C too...

Ciao
Alessandro

[alexzx]

Or if I have to buy a 4G0907107D and replace my 8E for
conclude the retrofit.

[watronik7]

Guys. Just read my instruction and follow all required steps. As I said you need VCP to calibrate and activate the system. If you want just swap your 8E and not to use VCP then you need to make sure the 8E unit comes from the vehicle where TSR wax activated otjwrvise you stlll need VCP to perform calibration.

Sent from my CLT-L29 using Tapatalk

[alexzx]

Yes Watronic7, i know that is necessary VCP for calibration.
I would like confirmation that with my 4G0907107C the operation is possible because I read in your guide that for 4G0907107C there are no files available for calibration.

In your guide i read this:

Note: Although Part No 4G0907107C is supported, currently corresponding ZDC file isnot available, hence parametrization cannot be completed.


Thak you very much for your job Watronik7

Alessandro

[watronik7]

Once you have genuine VCP you could ask support if C version zdc exist as qute often they provide certain files on request.

Sent from my CLT-L29 using Tapatalk

[alexzx]

I would like to buy a VCP but Just being certain About having the support. If the file doesn't exist for me It would be a problem.

[watronik7]

I am afraid that is a risk. Alternatively you use VCP to flash your C unit i E unit. Flash files are available on Internet but as always with flashing there is a risk of bricking your unit.

Sent from my CLT-L29 using Tapatalk

[alexzx]

Watronik7, I ordered VCP ;-)

[alexzx]

Hi guys, Watronik7 with your guide and VCP i activated TSR on my Audi A6 Avant 4G (2012)
The file for 4G0907107C is available in VCP ;-)
Thank you very much!!!
Alessandro