Security access for parking brake

[Plife]

I am trying to activate Auto Release Brake without Seatbelt On (This will allow you to move your car and have the brake release without your seatbelt on) on a 2013 Audi A4, however you need to get security access first, and when going into security access I do not get a code. Have tried in a few other modules and do get a code in these. Any ideas as this is really annoying when you simply want to move the car!

[Guest 2]

Like I said in the vcds thread, you won't find anything until rosstech update the label files for the new module. Did you try sending hem an email?

Another A4 user had ibis problem too - https://www.vwaudiforum.co.uk/forum/s...-53&highlight=

[Plife]

Yes dropped them an email, just wondering if anyone else had the same problem and had found a workaround

[Plife]

Rosstech sent me a security code which works, however in adaptation I now get a list of options rather than being able to specify a channel. Can't see what option I should be choosing!

Sent from my Nexus 7 using Tapatalk 2

[Guest 2]

Which options are they?

Post a screenshot.

[Plife]

Which options are they?

Post a screenshot.

Should have done that in the first place Chris!!! Now I have the screenshots I spotted the option.
However posted in the case they may help someone else! It was seat belt buckle detection and the security code was 78713.

Parking brake 1 by P.Life, on Flickr

Parking brake 2 by P.Life, on Flickr