allroad front upper control arm angles –
07-02-2013,07:26 PM
Hi all,
I have recently had an airbag leak with my gen11 arnotts, and because I've had them off and on a few times and changed the upper control arms, when I put the new bags on I want to make sure the angles are correct.
I have been driving around now for some time with it 402 mod down 22mm, and even with the arnotts and hotchkis roll bar it always felt a bit bouncy, but I did prefer it astheticly. In my opinion I feel that all related control arms have come under more stress from using the 402 mod.
I have now set the height back to stock and find the ride is more stable and closer to where I want it to be.
ps I have a spare arnott gen 11 air bag now.
04 allroad 2.5tdi v6,Hotchkis sports sway bars,pentagon glass,Sachs performance clutch,OEM RS6 spoiler, Arnott gen 11 air springs front with OEM shocks, rear with bilstein s4 shocks,Longlife stainless exhaust,Led interior lights,HEL braided brake hoses,Brembo 18Z 6 pot calipers,345mm amg discs ebc red stuff pads,allroad 4.2 rear calipers + vented disc,OEM Xenon Headlights,Camei grill,18" 8.5J RS4 alloys,yokohama wintrac 245/45/18 xl.
