Hi peeps ...

I was going to add voice control at some point to my car...

As a test I enabled voice control in the bluetooth module...

Ref link:- Audi A6 (4F) Telephone Preparation - Ross-Tech Wiki
[77] - Telephone

00x0x?0: Voice Control Language
  • 2 = English (United Kingdom)
So before....

Address 77: Telephone Labels: 4E0-910-336.lbl
Part No SW: 4E0 910 336 M HW: 4E0 862 335
Component: Handyvorb2 H10 1130
Revision: 00000000 Serial number: 00000007540751
Coding: 0010900
Shop #: WSC 00000 000 00000
VCID: 2C5D2F5B8F1CFD78ADD

The after....

Address 77: Telephone Labels: 4E0-910-336.lbl
Part No SW: 4E0 910 336 M HW: 4E0 862 335
Component: Handyvorb2 H10 1130
Revision: 00000000 Serial number: 00000007540751
Coding: 0010920
Shop #: WSC 00000 000 00000
VCID: 2C5D2F5B8F1CFD78ADD

I can now say I won't be getting full voice control module ... I agree fully with you Chris! voice control is a bit pants, no way work how you think it would ...

Today I must have tried 4-5 times to get it to dial a number... in the end I just used the manual method ... did get it to work a bit better after some practise...

The Clarkson video is something I can see happening (see linked thread) ... Link:- Question Can you retrofit a Speech Input Module into an Audi A8??

At least now though when I press button on steering wheel it does not say "But not used"...

Not bad for a freebie though ...