Error Code Readout needed for Lupo...Ilford/East london area

[s11ybm]

Hi All!!

I need some assistance.

In June the car wasn't driven or even started for a few weeks (3-4weeks). Now every time we take the car out, the engine management light comes on, and after a while either the epc light comes on and car doesnt go past 3000 revs or the car cuts out when its stopped ,followed by the epc light.

I'm wondering if anyone in the Ilford/East London area can plug the car in to see what faults there are...

Cheers

[Doctle Odd]

Do a reboot of the ECU, take off both battery terminals and hold them together for 10 seconds or so. then leave them off the battery for 15 minutes. Replace the terminals. DON'T do this unless you know your radio code!

[s11ybm]

Do a reboot of the ECU, take off both battery terminals and hold them together for 10 seconds or so. then leave them off the battery for 15 minutes. Replace the terminals. DON'T do this unless you know your radio code!

Thanks paul, It cleared the codes for a while, then it came back. I had the AA out over the weekend, they ran a scan and come back with fault code P0322..which means the camshaft sensor needs replacing...