Spigot Rings

[Chriseybaby]

Now that I should have some alloys on the way I need to get some spigot rings since they are from a new shape A4.

Looking on ebay there are some nice cheap ones, but is this something that I'm best to pay a few quid extra for? If so who would you recommend?

[jcdub]

The plastic spigot are ok for most use. I personally go for the anodized aluminum ones wish won't give any issues at all. You should find some on eBay that suit.

[Chriseybaby]

Thanks for the advice.

Is there a pic of your car somewhere? I have been considering door blades so would be interested to see what they look like

[jcdub]

VW AUDI Forum - VWAF

The link above should bring you to the pic, hopefully it's big a big enough pic :-)

[JimC64]

Hey Chris, I have spigot rings on my 19's

My hub size is the std 57mm but the 19's ( OEM ) were from a Q7 I think, with a bore of 66 approx. I used a company ( can't remember name now ) but also got a set off Ebay, both were of the plastic variety.

They've been on the car around a year now and I've had no issues.

[gupsterg]

That's sweet looking motor jcdub

[as400]

Hey Chris, I have spigot rings on my 19's

My hub size is the std 57mm but the 19's ( OEM ) were from a Q7 I think, with a bore of 66 approx. I used a company ( can't remember name now ) but also got a set off Ebay, both were of the plastic variety.

They've been on the car around a year now and I've had no issues.

Hmm I hadn't thought about bore size. The 19"s I sourced yesterday are 8.5jx19 5X112 and ET48 but the EBay advert made no mention of the bore size. Is this something that will be stamped inside the alloy or can you simply measure it?