2005 Audi a4 B7 airbag faults!!!!!! Help!!!! please

**Craig1989** · 20-05-2011,06:02 PM

Hi there, i have just got vag com and thought i would plug it in a see if there was any fault codes on my 2005 audi a4 b7 and this is what i have got!!!! any help would be great as i think its quite an important thing!!! another thing that i fond strange is that i have no Airbag light on atm!!!!! but i do have faults !!!!

Friday,20,May,2011,17:26:34:36838
VCDS Version: Release 10.6.2
Address 15: Airbags Labels: 8E0-959-655-94.lbl
Control Module Part Number: 8E0 959 655 G HW: 8E0 959 655 G
Component and/or Version: Airbag 9.41 H11 3530
Software Coding: 0031612
Work Shop Code: WSC 00097 210 90088
VCID: 3B7E2B68453FB6C4
3 Faults Found:
01579 - Signal for Seat Occupied Sensor; Front Passenger Side (G128)
000 -- - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Time Indication: 0
01045 - Tiptronic Switch (F189)
000 -- - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Time Indication: 0
01591 - Indicator Lamp for Airbag Off; Drivers Side (K144)
009 -- Open or Short to Ground - MIL ON
Freeze Frame:
Fault Status: 11101001
Fault Priority: 2
Fault Frequency: 1
Time Indication: 0

I have tryed to clear these faults but they just keep coming back!!!! as i said any help would be great!!!!!!

many thanks !!!!

**Craig1989** · 22-05-2011,12:45 PM

Anybody?? Someone must know what these faults mean?? I have tried to research but not having any luck finding any info

**kite** · 22-05-2011,03:01 PM

try clearing the faults from the modules rather than clearing after an autoscan.

**Craig1989** · 22-05-2011,04:27 PM

I have tried that and the faults still keep coming back!!! I the b7 fitted with a pass sear sensor?? I just find it strange that I have got these 3 faults and have no airbag light on!!!!!

**kite** · 22-05-2011,05:10 PM

From the rosstech wiki
http://wiki.ross-tech.com/wiki/index...ag_9.41#Coding

**Craig1989** · 22-05-2011,05:28 PM

Ok thanks for that what do you think I should do make sure the coding it correct and maby perform a reset and see if it goes away???

**kite** · 22-05-2011,05:50 PM

I would try a battery dis-connect first, if that doesn't work try to reset the module.

**Craig1989** · 22-05-2011,05:52 PM

Thanks for the info I will try that in the next couple of days and let you know how it's goes!!! Thanks again

**Craig1989** · 03-06-2011,03:23 PM

hi all, today i got a chance to get the vag com back on the car and try and sort out these airbag faults!, i tryed to reset the pass sensor but all 3 faults keep coming up. also i noticed that on my dash i can actually see a airbag warning light!! when i mean i cant see it i mean that when the ignition is turned off you can see the outline of each symbol like the engine management ect. i cannot see now outline of a picture or words saying airbag. i have googled the fault and gone to images and there are loads of images of peoples airbag light on and theres is next to the engine managment light. now the space next to my engine managment is blank there is nothing in there. can someone confirm where the light is located as i do find it very strange that there is not one. the last fault that i have got is that

01591 - Indicator Lamp for Airbag Off; Drivers Side (K144)
009 -- Open or Short to Ground - MIL ON
Freeze Frame:
Fault Status: 11101001
Fault Priority: 2
Fault Frequency: 1
Time Indication: 0

does this fault have something to do with it????

do i need to take the car to an audi dealer to get it looked at????

any advice is appreciated

many thanks