RNS510 Coding required - South Wales

**welshpedro** · 11-03-2011,04:44 PM

HI

I have just fitted a RNS510 to my 2011 Golf Match in place of the RCD510. All working OK, but I need a couple of things coded.

MFSW

Volume works and audio bar shown on RNS510, but right \ left buttons dont function and neither does microphone button (which used to mute RCD510).

Microphone button on MFSW and "star" button in 3 button roof console to operate voice commands (I have VW bluetooth installed and this was unaffected by RNS510 upgrade)

MFD

Nav to be displayed in MFD

Rear View Camera

I have lost image of RVC. Front and rear park sensors working OK with graphical display shown on RNS510 OK. Park Assist unaffected.

MDI

Worked fine with iphone 4 for music with RCD510, now it shows tracks and I can browse selection, but no sound.

Willing to travel a bit so does not have to be South Wales, and I have been in touch with an eBay seller (200 miles away, but I travel near them sometimes.. but not sure when next trip... and would like to sort ASAP).

Beer tokens waiting for any help...

**welshpedro** · 13-03-2011,10:20 PM

Also noticed the Radio \ Media information no longer displayed in MFD when scrolling through fuel stats\phone\setup.....

**john-mandy** · 23-03-2011,08:30 PM

have you got it sorted, i live in s wales and have full vcds

john

**welshpedro** · 23-03-2011,10:39 PM

Originally Posted by john-mandy

have you got it sorted, i live in s wales and have full vcds

john

Not yet John... would you be available to sort sometime?

**john-mandy** · 23-03-2011,11:31 PM

Could be possible, where abouts do you live in s wales, can you drive to mine if i setup a time and day.
problem is i,m busy in work for the next week and half and time is limited.
Are you able to use the vcds yourself, i,m not really up to speed on some of the coding you require, although i have the full version i havn,t had the time to research the full potential in its use, so if your happy to wait a little and do the work yourself, i,d be pleased to help, maybe i will just learn a little more as well.

john

**welshpedro** · 23-03-2011,11:36 PM

I'm near J37 (near Pyle) but I work in Cardiff (East of centre)... Never used VCDS but I have looked at most of the options I need to do here.... You let me know the best time for you.. weekends or evening..

**john-mandy** · 23-03-2011,11:50 PM

Ok, mon to thurs good for me, the problem is i don,t finish work until 5 pm, but if you need it done quickly its a possibility.

how much time do you think it will take.

It takes me about 50 mins to get to porthcawl, so thats about the time it will take you get to mine.

john

**john-mandy** · 23-03-2011,11:55 PM

Hi again welshpedro, i don,t know if you managed to read my last reply, but i,ll be online tomorrow between 7 and 8, should be able to sort somthing for you.

john

**welshpedro** · 24-03-2011,12:06 AM

Originally Posted by john-mandy

Hi again welshpedro, i don,t know if you managed to read my last reply, but i,ll be online tomorrow between 7 and 8, should be able to sort somthing for you.

john

Thanks ....