Few quick mods for the audi today.

[AliBailey88]

Today i fitted, led number plate lamp units, not the crappy bulb replacement ones but whole units.

Silvertec indicator bulbs all round.

Fresh number plates

Wolfsburg abt tuning number plate holders/surrounds

Few befores













Some quick pics afterward, was to cold lol

[Guest 2]

It just shows how a set of number plates can totally change a car! Good work!

[AliBailey88]

Ive put new plates on every car ive had, always freshens the look of the car up + they only cost me £3 a pair

[aaudi4]

nice touch, looks great.

[*1.8 T Quattro*]

V Nice mate.

How did you find getting the screws out for the number plate lights?
This is a mod im keen to do but mine look like they would disintagrate if i even touched them with a screw driver!

[AliBailey88]

V Nice mate.

How did you find getting the screws out for the number plate lights?
This is a mod im keen to do but mine look like they would disintagrate if i even touched them with a screw driver!

i used a tiny ratchet and correct size philps bit on a small extension so it would fit diretly on the screw, not at a angle which feks them up. Ive had to drill one out before on a 58plate a4, took a while.

[aaudi4]

Ive put new plates on every car ive had, always freshens the look of the car up + they only cost me £3 a pair

hi, were did you buy the units and plates? seen units on ebay approx. £25 can you get cheaper? plates i have been looking at on websites are approx. £25 pair. looking to do same, looks smart.

[AliBailey88]

these are what i purchased

led

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT

Chrome bulbs

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT

plate surrounds

http://cgi.ebay.co.uk/Audi-Wolfsburg...item53e0c3e1ad

I had the number plates made up at work (Renault) thats why i get them so cheap.

[aaudi4]

thats great thanks for that. they were the leds i was looking at. i have been looking at my current ones today and as already mentioned by someone else as appears to be common problem, mine are knackered. they are actually siliconed in place. one screw has snapped so needs drilling out if possible, as dont think enough space to get the drill in. other screw stuck solid. left for now to have a think of best way to remove. does that complete unit with handle, lock, lights come out?

[AliBailey88]

im not sure about the lock/handle and lights all coming out in one. If it was my car i would pry the light covers off so they snap around the screws then use mole grips or similar to grip onto the screws and undo them