rs6 alloys on a4 b5

[jimicks]

Hi there,
I have been offered a set of rs6 ronal 18inch alloys pcd 5x112, does anyone know if they would fit my a4 b5 quattro?

thanks

[Connor_Scotland]

Well I have 19" RS6 alloys on my A4 Avant and its lowered 45mm and doest rub with a rull car either.

So I assume so bud.

[pug-n-polo]

Would really like to see an answer to this one as im in the same situation.....

[sbt]

Would really like to see an answer to this one as im in the same situation.....

ok if the rs6 wheels have come off an a4 they will be 8" width with a pcd of 112 and an offset of 43 these will go straight on an a4 . but if the wheels have come off an a3 s lne they will be 7.5" width . pcd 112 but the offset is 54 which means they will fit. but will sit 11mm further into the arch and with the thinner wheel ie 7.5 wont look quite right . hope this helps

[fourringsrus]

As above and to clarify, yes your car has a pcd of 5x112 as do all the later Audis, the earlier A3 does not ( from memory 5x100) so if A3 rims are used they must be 2004 onwards.
The et measurement alters how much the wheel will stick out of the arch or also whether the rim will be too close to the suspension, so if you can not obtain the correct et figures just try the rims on if possible.

[hotrod_boogie]

yes they fit a treat mate, have just put them on A4 B5 with 225/40/18 tyres, perfect fit

[dmcmoran]

What year rs6 did they come from?

[ming]

yes they fit a treat mate, have just put them on A4 B5 with 225/40/18 tyres, perfect fit

With 225 tyres they are a perfect fit. What if the tyres were 235? Would there be a potential interference issue with the suspension arms?

[hibbsy21]