96 A4 Drivers Seat Removal

[MIDCO]

Hi Everyone Need Some Info On How To Remove Drivers Seat To Change A Bush On Seat Slide

[docurley]

This should help

Run the seat all the way forward and remove the plastic trim bits at the aft end of the tracks. Now, run the seat all the way back, and remove the plastic trim bits covering the bolts that hold down the front (careful with these, they break if you take 'em off wrong). Remove the two bolts holding down the front and lift the front and disconnect the wiring. Slid the seat backwards out of the track, and try and get it out of the car without sliming your carpeting or gouging your console. Good Luck!